Flame Resistant Clothing

Showing all 3 results


Men and women walking forward wearing flame resistant clothing

About Flame-Resistant Clothing

To ensure the safety and health of works, the Occupational Safety and Health Administration (OSHA) monitors guidelines and enforces occupational health and safety rules. In early 2010, they established new regulations requiring flame-resistant (FR) clothing for industries in which flash fire and electric arc flash hazards are or may exist.

Any personnel working near any stage of petroleum or natural gas production can present a risk for arc flashes or flash fires. Personnel working close to threats associated with an arc flash should take necessary precautions to shield themselves.

Arc-rated (AR) flame-resistant clothing should always be worn to ensure the safety of you and your team. Although AR clothing will not sustain combustion, it will provide the wearer insulation from the powerful heat of an arc flash up to the arc rating. The arc rating is the amount of energy the fabric can block to prevent the wearer from receiving second-degree burns. Wearing flame-resistant clothing that has an arc rating equivalent to or higher than the plausible incident energy is essential to avoid such burns.

It’s for this reason that both U.S. and Canadian safety organizations require the use of FRC when working in dangerous conditions.

For businesses, flame-resistant clothing is an investment in safety — and safety is an investment in your business. When your employees have the protection they need, they can work more productively and with less downtime. Additionally, FRC helps you reduce your liability and mitigate the risk of an accident that can have far-reaching consequences for your finances and your reputation.

What To Consider When Buying Flame-Resistant (FR) Clothing Online

When buying FR clothing, you need to know you are purchasing a quality product that offers genuine protection. Any purchase should meet the relevant regulatory standards.

The majority of recognized FR clothing brands are made to sustain their flame resistance for the lifetime of the garment. However, some brands may only use a chemical application process to treat the fabric which makes them FR. As the wear of the garment continues, the FR properties on treated FR fabric can begin to degrade, thus becoming less protective as the wear of the garment continues.

When it comes to FR clothing, there are many aspects that must be inspected closely before an appropriate purchase decision can be made, including their compliance with relevant safety standards.

For electrical technicians, that standard is ASTM F1506-98. For manufacturing environments, it’s NFPA 2112. ASTM F1959 is another standard that deals with flame-resistant fabrics, while ASTM F1891-98 relates specifically to FR rainwear. Ultimately, the specifics of your operation will determine the relevant guidelines. If you’re at all concerned about choosing the right product, contact a D.E. Gemmill Inc. representative directly.

Of course, FR clothing should do more than just meet your compliance obligations. A good product will also be comfortable and easy to work in as well as highly visible, durable and shrink-resistant. D.E. Gemmill Inc. only carries FR clothing by leading manufacturer-partners including:


  • Rasco FR. Rasco FR includes hooded jackets, insulated coats and other outerwear as well as shirts, sweatshirts, overalls and more. Precisely designed, these garments shield workers from the injuries associated with electric arc flashes and flash fires. Provided users follow the clothing care instructions, Rasco FR garments are guaranteed to be flame-resistant for the lifetime of the item.


  • Portwest (BizFlame). Available worldwide, BizFlame is an anti-static, lightweight cotton rich and flame-resistant fabric that is engineered for extreme performance comfort and strength. Workers in hundreds of companies throughout the oil, gas, mining and other related industries frequently utilize this advanced fabric.


  • National Safety Apparel. National Safety Apparel or NSA is a manufacturer of high quality FR safety clothing, thermal PPE, electrical PPE, cut-resistant, high vis clothing and rainwear — proudly made in the USA since 1935. OSHA and NFPA 70E require head protection for employees conducting work where possible arc flash hazard exists.

Explore our full inventory of FR products using the links on this page.

Why Buy Fr Clothing From D.E. Gemmill Inc.?

D.E. Gemmill Inc. is a longstanding supplier of FR clothing for customers in a range of industries. We offer fast and reliable shipping across the country as well as a satisfaction guarantee and generous return/exchange policy. Our knowledgeable staff can help determine what you or your company might need to ensure you are adhering to current regulations.

We are proud to offer unmatched workwear at an affordable price for men and women, and we look forward to serving you and your company’s needs. If you’re in the York, PA, area, stop by our retail store to try on any product in our inventory or to get assistance from one of our knowledgeable sales team members.

Can’t find what you’re looking for? We can fulfill custom requests for clients with unique safety requirements or other considerations. Call us today or place your order through our online store.

Many nuances and requirements surround FR clothing. Do you need flame-resistant or flame-retardant clothing? Maybe your supervisor has told you that you’ll need to wear flame-resistant clothing at a new job you’re starting. Whatever the case, you suddenly have reason to be curious and ask — what is flame-resistant clothing?

Today, we’re going to walk you through the basics. We’ll talk about what flame-resistant clothing is, the materials used to make it, how long it lasts, how to clean it and much more. By the time you finish reading this guide, you’ll be an expert on all things regarding flame-resistant clothing.

We offer a broad selection of high-visibility clothing with hard hats, gloves and more.

What Is Flame-Resistant Clothing?

Let’s begin at the beginning with a flame-resistant clothing definition. Based on the name alone, it might be easy to assume flame-resistant clothing is entirely or even mostly fireproof. Is that true?

As it turns out, not really. Flame-resistant clothing — often abbreviated as FR clothing — refers to any clothing items that are designed and specifically manufactured to protect wearers from potential intermittent flames and thermal exposure.

To break this definition down further, we can look at the specific ways in which FR clothing protects the wearer from injury due to flames. These clothing items will not easily catch fire, and even when they do, their design causes them to self-extinguish. If you get exposed to a brief, intermittent flame while wearing this clothing and your clothes catch on fire, the material will naturally put out the fire. This ability significantly lowers the wearer’s risk of burn injury and can often provide valuable time to escape the unsafe environment.

These attributes work together to provide a far greater chance of escape and survival if the wearer finds themselves suddenly in the middle of a flash fire, an electric arc or some other unexpected thermal problem that might cause injury. In situations like these, fire-resistant clothing can be the difference between being severely injured or escaping unscathed.

OSHA, the Occupational Safety and Health Administration, delineates specific guidelines. Any fireproof clothing required by a workplace will need to fall within these guidelines. OSHA stipulates any employee working in conditions that might expose them to flames, electric arcs or similar hazards must not wear clothing that “could increase the extent of injury.”

OSHA’s FR clothing requirements then go on to prohibit clothing made of rayon, nylon, polyester or acetate, unless the employer can prove these fabrics have the appropriate treating to withstand the conditions the employee may encounter during their work.

What Is The Purpose Of Flame-Resistant Clothing?

FR clothing’s purpose is to protect the wearer from an emergency in which their clothing could catch fire. Many people go to work daily in industries that involve the risk of fire, such as manufacturing or metalworking. While the rate of fires occurring in these fields may be low, it is imperative to prepare for the worst-case scenario. In a disaster, wearing FR clothing could save someone from severe injuries.

Specifically, FR clothing manufacturers use non-conductive fabrics and components that will not melt onto the skin, keeping the extent of a burn injury to the minimum. FR jackets, shirts and pants can provide the thermal insulation needed to protect the wearer from extreme heat. Quality FR clothing also resists breaking open, which prevents the wearer’s skin from becoming exposed to hazards.

Who Needs To Wear Flame-Resistant Clothing?

If an employee works in environments where injury due to fire, heat or electrical mishaps are a real possibility, the odds are good they should be wearing flameproof clothing. OSHA’s guidelines dictate more specifically who should be wearing flame-resistant clothing.

Three broad categories of workers should wear flameproof clothing for protection, based on the type of hazard the worker will encounter while completing their work. Here are the three primary hazards.


  • Electric arc. People exposed to this hazard include electricians and utility workers, among others.


  • Flash fire.This category includes pharmaceutical, chemical and refinery workers.


  • Combustible dust. The category covers workers in food processing plants, the paper and pulp industry, etc. 

Is There A Difference Between Primary And Secondary Protection?

When learning about flame-resistant clothing, you may frequently hear the terms “primary protection” and “secondary protection.” What do these terms mean? Does secondary protection offer less safety than primary protection?

The real difference between these two designations lies in the clothing’s intended usage and the protection it offers as a result of this intended usage. The following is a brief breakdown of the two protection levels.

#1 Primary Protection

Primary protection refers to flame-resistant clothing designed for use during activities that will frequently expose the wearer to flames, radiant heat and potential molten substance splash. One familiar example to point to is a firefighter’s gear. When out answering a call, the firefighter will encounter extreme conditions and will need the additional measures offered by primary protection gear.

#2 Secondary Protection

Secondary protection is for situations where the wearer may encounter exposure to intermittent hazards. These may still include radiant heat, molten substance splash and flames, but the odds are that these will not be constant hazards. Rather, they may appear briefly before disappearing again. In other words, the wearer of secondary protection is not likely to be in as much constant danger as the wearer of primary protection.

What Should I Wear Under My Flame-Resistant Clothing?

If flame-resistant clothing protects you from flames, heat and other similar environmental concerns, can you take any additional measures to make the clothing more effective? On the other hand, should you avoid any gear that might make this clothing less effective?

The clothes you decide to wear under your fireproof clothing have a significant impact on your safety and the effectiveness of your FR clothing. Whenever you wear FR clothes, remember to only wear non-melting garments underneath them.

There are two primary reasons for this caution. The first is that by doing this, you’re essentially adding a second layer of FR protection. Even if your first layer of outerwear gets damaged or burned, you will still have a second layer to protect you. The layer of air insulation between the two layers also helps keep you safe.

Another reason to dress in non-melting underclothes is the intense environment you may be working in. Even though your outer layer provides protection, it’s still possible your underlayer will begin to melt or become overheated. If temperatures and conditions are extreme enough, these bottom layers of clothing may even ignite and cause serious injury.

Flame-Resistant? Fire-Resistant? Fire-Retardant? What’s The Difference?

Anyone who is not extremely familiar with this information and these terms might assume these three terms are synonyms. The confusion is understandable, given the similarities. Two of the terms are interchangeable, but the other is quite a bit different.

Here are the major differences between them.

  • Flame-resistant. Flame-resistant clothing consists of inherently nonflammable fabrics and materials. The materials have a chemical structure that naturally resists flames. These types of fibers can catch fire, but they will either self-extinguish or burn exceedingly slowly. These materials’ essential function is to prevent the further spread of fire.


  • Fire-resistant. This term is a synonym for flame-resistant. If you hear someone say “fire-resistant” instead of “flame-resistant,” don’t get confused. They mean the same thing, and it is correct to use them interchangeably.


  • Fire-retardant. Fire-retardant fabrics have undergone chemical treatment to acquire some of the same qualities that flame-resistant fabrics inherently possess. As a result of these chemical procedures, flame-retardant fabrics become self-extinguishing and slow-burning. Any type of fabric can qualify, but it must undergo this treatment before it falls under the classification of fire-retardant.



Not all fire-resistant clothing consists of the same fabrics. There are multiple choices available, and each comes with different benefits and hazards. Choose the fabric that best suits your employees’ needs and working environment. What keeps an employee safe in one location may not be ideal for another location.

Most flame-resistant clothing consists of a blend of several different materials, which are almost always synthetic. Their careful engineering and design make them self-extinguishing and slow to ignite.

Here are a few of the common fibers with inherent flameproof qualities commonly used to create FR clothing.


  • Modacrylic. Among the most popular and common options available today, these fibers are often part of a blend to create several different flame-resistant fabrics. These various combinations of fibers work together to create fabrics that can easily stand up to several types of standards and regulations.


  • Nomex. Nomex is another fiber with inherent flame-resistant qualities. As opposed to modacrylic fibers, Nomex can create FR garments on its own. It doesn’t have to be a stand-alone, however. It’s also possible to combine it with other materials such as Kevlar.


  • Kevlar. These fibers are flame-resistant, but have many other additional properties such as high strength. Kevlar can create flame-resistant clothing and many other different items. 

Each type of flame-resistant fabric will come with unique pros and cons. For instance, Kevlar is extremely heavy-duty, but has a higher price tag. However, there are no specific flame-resistant clothing dangers, and all can protect the wearer from hazardous heat-based conditions.

Is Cotton Fireproof?

One commonly held idea is that if you wear clothing made from 100% cotton, it will protect you from heat, electric arcs and flames. However, this is a misconception, because 100% cotton clothing is still flammable. When exposed to an ignition source, it will catch fire and will not extinguish itself the way flame-resistant clothing will.

While cotton will not have the same risk of melting and burning fabrics like nylon and polyester will, it is perhaps even more likely to catch fire. Based on this information, we can confidently say 100% cotton clothing is not a suitable alternative for situations requiring flame-resistant clothing.


What Are The Benefits Of Flame-Resistant Clothing?

The benefits of flame-resistant and flame-retardant clothing are obvious. They allow workers to conduct work in potentially hazardous locations with a greatly reduced risk of injury. Though there are no articles of FR clothing guaranteed to prevent every injury in every situation, the risk while wearing these specialized garments is exceptionally lower than it would be if the worker was wearing everyday clothing.

With fire-resistant clothing, the promise is not that the garments will never catch fire. They will resist igniting, and will generally fulfill this purpose in all but the most extreme situations. However, flame-resistant clothing’s remarkable strength is that it prevents fires from spreading. Even if the clothing does catch fire, it will almost always extinguish itself quickly.

These self-extinguishing properties mean the wearer is less likely to suffer from burns and will have time to retreat from the hazardous environment without the added danger of spreading the fire via their clothing. The fire will be more likely to remain contained, and the worker will be more likely to escape unharmed.

Flame-resistant clothing allows workers to do their jobs in environments and situations that would otherwise be too hazardous, all with a very low risk of injury.

Is Flame-Resistant Clothing Bad For Your Health?

There are many materials with inherent flame-resistant properties that meet the safety standards set by OSHA. Naturally flame-resistant materials, such as wool and silk, do not easily ignite or melt and do not need chemical treatments. These materials contain FR qualities at the molecular level, which means the protection they offer will not wear out regardless of time and frequency of use.

Flame Resistant Clothing Dangers

On the other hand, some engineered flame-retardant fabrics can be hazardous due to the chemicals used to treat them and could . For example, FR clothing that involves formaldehyde may pose health issues, such as rashes or even some types of cancer. To help you avoid toxic materials, the National Institute of Environmental Health Sciences outlined the most dangerous types of flame retardants.

Choosing FR pants, shirts or jackets made from inherently flame-resistant fibers instead of fabrics treated with hazardous chemicals can help you stay protected from burns without sacrificing your overall health.

How To Shop For Flame-Resistant Clothing

If you have never shopped for flame-resistant clothing, a few points might initially need a little clarification. How are the garments supposed to fit? Are there any special considerations you need to be aware of? Is FR clothing different for men and women?

To help you address some of these specific concerns, we’ll break them down into easy-to-understand sections.

How Should Flame-Resistant Clothing Fit?

With FR clothing, the rule of thumb is that a looser fit offers more protection. When a garment is looser, there is an added layer of air between you and the material, providing extra insulation against the heat or flames that you may encounter while wearing the clothing. If you wear skintight flame-resistant garments, the flames will be almost directly up against your skin. Even with the clothing as a protective layer, it’s safer to allow this air cushion between your skin and the fabric.

However, you should not take this as an invitation to buy the baggiest and loosest-fitting clothing you can find. While this might initially seem like a good idea, it could very likely lead to disaster. It’s crucial to remember baggy clothing can easily snag on surrounding objects and hazards, trapping you and leaving you immobile, or ripping and making you more vulnerable to environmental hazards.

The best solution is to find an in-between fit. Your clothing should be neither form-fitting nor baggy. It should have a comfortably loose fit, but should not hang off your body so much that it becomes liable to catch on nearby objects.

When buying flame-resistant clothing, remember that, like most clothing, it will shrink a little bit during the first few washings. With this concern in mind, you may want to buy a slightly bigger size than you ordinarily would so the garment has room to shrink down to the correct size.

Are There Specific Designs For Women?

Some FR manufacturers design fits and styles specifically for women, while others do not. 

If you are female, you are welcome to buy designs targeting women, but there is no special need to. The purpose of flame-resistant garments is to provide protection, and this function works the same way regardless of who’s wearing the clothes. Because of this and the slightly loose-fitting nature of these garments, many FR clothing designs are gender-neutral.

What Should I Look For?

In most cases, your company will provide specific instructions about what you need to purchase. For example, they will tell you if you need primary or secondary protection. They will also tell you which specific garments you need to buy and wear.

Another essential quality to look for is a good fit, which we discussed earlier. Remember to buy articles of clothing that are loose-fitting without being excessively baggy, and to leave room for the clothes to shrink slightly.

One additional thing to be aware of is the manufacturer you choose to buy from. Every manufacturer will likely have a different selection of fabrics and styles. The clothing quality may vary from manufacturer to manufacturer, as will factors like price, various guarantees and the quality-control process. Take all these aspects into account when you decide which company to purchase from.

Which Flame-Resistant Standards Apply To My Business And Me?

There are extensive rules and regulations in place to keep workers safe as they complete their tasks in hazardous locations and environmental conditions. Each company will require their employees to work in different kinds of conditions performing a variety of tasks. Virtually every situation will be different.

Because of this, different standards will apply to nearly every situation. You will likely not be subject to the same guidelines that apply to another worker at a different company.

For more specific information, you’ll need to do more research into your industry and working conditions. Remember, it’s your and your company’s responsibility to learn what rules and standards apply to you, and then to follow these rules.

Do We Really Need Flame-Resistant Clothing?

As with any rules, regulations or guidelines, there is a certain extent to which it will always be tempting to ask, “Is that rule strictly necessary? After all, no one at my company has gotten hurt in so long. Aren’t these rules a little too extreme?”

While this is understandable, it’s still essential to realize the rules and regulations are there for a vital reason: safety.

OSHA mandates FR clothing and its usage, and the organization will not hesitate to hand out fines to any companies it finds to be outside of compliance with the regulations.

Besides protecting employees, FR clothing also serves as a handy insurance policy for your company if an accident occurs. While it’s expensive to outfit your workers in the appropriate gear, it can easily become much costlier if an employee experiences severe burns. The cost of things like workers’ compensation, training temporary replacement workers and other related expenses will usually far outweigh the cost of protecting the employees in the first place.

All this proves that, even if it weren’t for OSHA regulations, most companies would much rather outfit their employees correctly than have to deal with on-site accidents or injuries.

The rules may seem overbearing or unnecessary, but they’re there for a good reason. If it looks like there’s no need for the rules, that’s for the best. It means the guidelines are doing their job because no one is getting hurt. Things are working as they should.

What Happens If My Company And I Don’t Comply With Fr Standards?

As mentioned in the previous section, you and your company may feel that OSHA flame resistant clothing requirements are excessive, hinder productivity in your workplace, are inconvenient or any other number of grievances.

Based on these feelings, let’s say you and your company refuse to comply with the safety standards regulating the use of fire-resistant clothing. What would the consequences be?

OSHA will take note of your company’s inaction when providing a safe working environment for your employees. If your company refuses to comply with their standards, they may fine you, or even pursue legal action. You may also be at risk for litigation from other sources.

In almost every possible scenario, it is safer and more cost-effective just to abide by OSHA’s guidelines regarding the use of flame-resistant clothing.

How Long Does Fire-Resistant Clothing Last?

It’s impossible to make a blanket statement concerning the longevity of every piece of flame-resistant clothing. Various factors may affect FR clothing’s lifespan, such as the manufacturer, the quality of the garment and the type of fabric used, how often you wear the garment and how much wear and tear it experiences.

Some varieties of flame-resistant clothing can last as long as five years, while others will wear out and need replacing after as little as nine months. You will know you need to replace your flame-resistant clothing when it gets damaged beyond repair, has become contaminated or is no longer functional. You can also replace it when it suffers aesthetic damage, but that is more of a personal decision.

If you’re worried your flame-resistant clothes won’t last as long as you would like, you can be selective about which manufacturer you purchase from. Some companies will use more durable fabrics or different construction techniques that help the garments last longer.

There are many benefits to clothing that has a longer lifespan. Firstly, a longer lifespan is beneficial because it means you will have to replace the clothing less frequently, which translates into lower costs in the long run. Even though the clothing with the longer lifespan may cost more upfront, you will save money in the end because you will have to replace it less frequently.

Another benefit of longer-lasting clothing is that it will be of a higher quality. The fabric will be more durable, the garment will be better constructed and will protect the wearer from the potentially hazardous working environment.

Caring For My Flame-Resistant Clothing

While everyone’s job is slightly different, you’ll likely put your FR clothing through some demanding conditions while working. As a result, you’re going to have to clean your flame-resistant clothing fairly regularly. Let’s break that into smaller sections as we talk about the specific ways you can clean and care for your fire-resistant clothing.

Can You Wash FR Clothing?

While it is always necessary to consult the care instructions for your specific piece of FR clothing, most FR clothing is safe to wash. You should try to get into the habit of always washing your articles of FR clothing before wearing them. Washing your FR clothing the right way can help extend the garments’ longevity so they can continue keeping you safe on the job.

Most importantly, be sure to always wash your FR shirts, pants and jackets separately from your regular clothes. Washing them together could damage your FR clothes’ flame-resistant qualities. The following section will discuss how to wash loads of FR clothes in more detail.

How To Wash And Dry Fr Clothing

The good news is that for most FR articles of clothing, the cleaning process is fairly simple. You can feel free to clean these garments at home in your ordinary washer and dryer, using your choice of laundry soap. You should hardly have to change anything from your normal washing and drying procedure to clean your FR clothing.

However, it’s essential to note that it’s inadvisable to use chlorine bleach with your FR clothing. It’s also a good rule of thumb to avoid using fabric softeners. Finally, for the best results, launder these clothing items separately from the rest of your clothes. If your FR clothes are extremely soiled and need a deeper cleaning than usual, wash them on the hottest setting allowed on the clothing tag.

Most FR clothing includes at least a small percentage of cotton, meaning they are susceptible to shrinkage during the first several cleanings. If you’re concerned about your garments shrinking, you can help prevent this by hanging the items to dry on a drying rack instead of running them through the dryer.

If you have additional concerns about your specific FR clothes, we recommend looking at your clothing tags. While every manufacturer is different, you should be able to find more individualized washing instructions there. In general, however, the guidelines listed above should provide plenty of information to get you started.

Can You Dry-Clean FR Clothing?

Yes. You can dry-clean your flame-resistant clothing with no adverse effects. Since you can wash them at home using your normal clothes washer, there is no particular need to have them dry-cleaned. However, if you prefer to take them to the dry cleaner, there is no reason you cannot safely do so.

How Many Times Can You Wash FR Clothing?

Most flame-resistant clothing is durable enough to withstand a lot of wear and tear. Therefore, a few trips through the washing machine are not likely to damage it. You should feel confident in washing your FR garments as often as they need it. Unless you are using any of the non-recommended items we discussed above — such as fabric softener or bleach — you can wash your FR clothes as often as you like.

How Can You Repair FR Clothing?

When flame-resistant clothing becomes damaged, you may immediately wonder if there’s a quick and easy fix you can apply so you can get your clothes back on the job again. It’s true that you can repair damaged FR clothing, but it’s a little bit more complicated than getting out your sewing kit and patching a hole.

Correctly repairing FR clothing requires using flame-resistant materials that are consistent with the original materials used to create the garment, so the entire piece retains its flame-resistant attributes. Repairing FR clothing with non-flame-resistant materials can compromise the entire garment, which might mean it fails to protect you on the job.

If you lack the supplies or experience to handle this level of repairs, it’s best to contact the manufacturer directly. They will complete the repairs with the correct material so that garment remains ready and able to protect you while you work.

When Do You Need To Replace Flame-Resistant Clothing?

Sometimes, you can quickly repair FR damage, but there are also cases where the garments become damaged beyond repair. When this happens, there’s nothing to do but to throw the items out and buy replacements.

Here are a few of the warning signs it might be time to retire your flame-resistant clothing and buy replacements:


  • The clothing has tears or holes that are too large to repair safely and correctly.


  • The fabric itself is too worn and threadbare to provide adequate protection against the environmental hazards you will encounter.


  • The clothing has become stained with a flammable substance that you can’t remove through cleaning.


  • The garment has come into contact with bleach.


  • The collar, cuffs or seams have torn or are otherwise frayed or open in some way.


  • If your flame-resistant clothing begins to exhibit any of these signs, don’t delay. Buy a replacement item right away.


You might think to yourself, “This garment is still fine. I probably should buy a replacement, but I’ll wait another week or another month.” This type of thinking is understandable, but it can also be extremely dangerous. You have no way of knowing when an accident will strike. What if your FR clothing is too damaged to do its job on the one day you need to be able to rely on it to protect you?

Don’t wait. If your clothing gets damaged beyond repair, it’s time to buy a replacement.

However, keep in mind that you will not have to replace your FR clothing because the flame-resistant qualities have worn out. Since flame-resistant fabrics have an inherent chemical structure that makes them self-extinguishing, this property will not wear out over time. And even though flame-retardant clothing has undergone treatment to achieve these same properties, most manufacturers provide a lifetime guarantee, meaning the qualities will not wear off in this case, either.

Shop For Your Flame-Resistant Clothing Today

Do you need a new set of flame-resistant clothing? Whether this is your first experience buying FR clothing, or if you have years of experience and are just looking for some replacement items, D.E. Gemmill Inc. is the place to shop.

As a contracting company, we understand the importance of supplying yourself and your employees with the very best in safety equipment. That includes flame-resistant clothing. And as retailers, we make it our business to provide you with these items. We pride ourselves on taking your safety and the safety of your employees seriously. That’s why we supply high-quality safety gear, including, but not limited to, flame-resistant clothing.

Our wide selection of flame-resistant clothing includes pants, shirts, overalls and outerwear such as coats and jackets. All these clothing items come in numerous styles to suit your various needs. In addition to these more traditional items, we also offer an assortment of hats, hoods, protective arm sleeves and more.

For all your flame-resistant clothing needs, browse our full selection today. And if you have any questions at all about safety apparel — how it works, how to buy it, whether or not you need it or any other related question — don’t hesitate to contact us. We’re happy to answer any and all of your questions and provide you with any additional information you may need.

The Different Types of Flame-Resistant Fabrics

Modacrylic Fibers

Properties: Modacrylic fibers are synthetic fibers made from a polymer containing ~50% acrylonitrile. They have excellent flame-resistant properties due to their high nitrogen content and thermal stability at high temperatures, making them suitable for welding applications.


  • Inherent flame-resistant properties without need for topical treatment
  • Good fabric strength and abrasion resistance
  • Comfortable and soft hand feel
  • Dyeable to various colors like red, black



  • Lower thermal protection than aramids like Nomex/Kevlar
  • Susceptible to UV degradation over time
  • Lower tensile and tear strength than aramids

Suitable Applications: Modacrylic blends are widely used for FR workwear like shirts, pants, coveralls in industries like electric utilities, oil/gas, manufacturing, and welding where arc flash and flash fire hazards exist.


Nomex (Meta-Aramid): Properties: Nomex is a revolutionary meta-aramid material made from polymers with aromatic rings. It has exceptional thermal resistance and won’t melt, drip or support combustion in air, making it ideal for welding and fire/emergency response.



  • Extremely high thermal protection (highest among FR fabrics)
  • Retains strength and integrity at high temps
  • Inherent FR properties won’t wash out
  • Good cut/abrasion resistance



  • More expensive than modacrylic
  • Lower breathability and comfort
  • Prone to UV degradation without treatment

Suitable Applications: Nomex is preferred for firefighting gear, race car driving suits, welding jackets/aprons and other applications requiring maximum thermal protection.


Kevlar (Para-Aramid): Properties: Kevlar is a para-aramid fiber renowned for its high tensile strength compared to steel. It also provides excellent thermal protection and cut resistance, useful for welding applications.



  • Extremely high strength-to-weight ratio 
  • Excellent thermal stability and FR properties
  • Cut/abrasion resistant
  • Retains properties at high temps



  • Lower thermal protection than Nomex
  • Stiff hand feel, poor moisture management
  • Expensive
  • Susceptible to UV degradation

Suitable Applications: Kevlar is used in protective apparel like fire shelters, proximity suits, cut-resistant sleeves/gloves for welders. Also used in fire blankets, aluminized Kevlar fabrics.

Selecting the Best FR Clothing Based on Hazard Risk and Industry

Hazard Risk Categories

Arc Rating (ATPV/EBT Rating) – This measures a fabric’s thermal insulation in cal/cm2 when exposed to an electric arc. Higher ratings indicate more protection needed for welding and electrical work.

<4 cal/cm2 – Used for low arc flash risk, like panel cover removal

4-8 cal/cm2 – For increased arc flash risk, like welding or working on live 600V equipment

>8 cal/cm2 – For hazardous arc flash environments up to 40 cal/cm2

Flash Fire Protection

FR garments rated for hazard risk of 0-3 seconds of flame exposure time. Look for certifications like NFPA 2112 for oil/gas, welding industries.

By Industry


  • Electric Utilities: NFPA 70E requires AR rated clothing based on arc flash calculations. Minimum 8 cal/cm2 for most live electrical work like welding.


  • Oil & Gas: NFPA 2112 certified garments with flash fire escape protection. Some jobs like welding may need arc rating too. 


  • Manufacturing: Depends on specific operation – welding, metalwork may need 4-8 cal FR fabric. Particle explosive dust requires static dissipative FR.


  • Emergency Response: Firefighters need structural fire gear + Nomex/Kevlar proximity suits and fire shelters.


  • Welding: Requires flame resistant welding jumpsuits and FR jackets/aprons/caps rated for molten metal splash. Sleeves and FR undergarments recommended.

Overview of FR Clothing Testing & Certification Standards

NFPA 2112 – Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire

  • Specifies design, certification requirements for FR garments like welding jackets
  • Tests flame resistance after home/industrial laundering
  • Requires body burn prediction to model degree of burn injury  

ASTM F1506 – Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Arc and Related Thermal Hazards

  • Establishes specifications for AR/FR fabrics based on arc rating and degradation temperatures 
  • Fabric tests: Break-open resistance, thermal shrinkage, melting/dripping
  • Essential for welding apparel safety
  • ASTM F1891 – Standard Specification for FR Rainwear
  • Specific requirements for breathable, waterproof FR rainwear fabrics
  • Tests water penetration resistance, tear strength, thermal stability

These standards are crucial for ensuring FR clothing like welding jackets/aprons will provide adequate protection. Third-party certification to these standards is required by OSHA regulations.

Proper FR Clothing Layering Techniques and Recommendations

Layering FR garments provides additional insulation and escape time in arc flash, welding sparks or flash fire scenarios. However, care must be taken in selecting proper FR fabrics for each layer.  

Typical 3-Layer System:

  • Outer layer: Sportweight FR fabric like 7oz Nomex IIIA for arc/flash fire protection
  • Middle layer: Heavier weight 9oz Nomex for increased thermal insulation  
  • Inner layer: FR knit underwear to wick moisture away


  • All layers should be FR rated and meet the hazard risk category 
  • Outer layer should have proper AR/EBT rating for welding application
  • Avoid flammable air gaps between layers (overlapping layers)
  • Consider breathability needs based on workload/climate

Specific Recommendations:

  • Electric Utilities: AR rated outerwear over FR shirt/pants
  • Oil/Gas: Flash fire rated coveralls over FR underlayers  
  • Manufacturing: Single FR layer may suffice unless higher AR rating needed for welding
  • Fire/Emergency: Structural PPE plus proximity gear/fire shelters
  • Welding: Leather sleeves, FR jacket/apron over FR shirt/pants

Specific Care Instructions for Flame-Resistant Clothing

Modacrylic/Cotton Blends

  • Wash separately from other clothing
  • Use liquid detergent without chlorine bleach 
  • Machine wash warm or cold, gentle/normal cycle
  • Can be machine dried on low/perm press setting
  • For heavy soils on welding garments, wash in hottest permitted water
  • Avoid fabric softeners or starch


  • Similar wash guidance as modacrylics  
  • Can use powder detergents like Tide
  • Machine dry low/perm press or line dry
  • For Nomex, use lower heat settings
  • For Kevlar, use warmest permitted temperatures
  • May need additional softening agents

General Tips

  • Check manufacturer instructions first
  • Wash new FR garments separately 3-4 times before wearing
  • Use coldest effective water to extend lifespan
  • Inspect for wear/damage after each wash cycle
  • Replace when damaged or heat/arc protection is compromised

Industrial Laundering Processes And Services For Fr Clothing

Many companies like Cintas opt for industrial laundry services to properly clean and maintain their FR clothing programs for welders. This helps ensure garment safety, longevity and compliance.

Key Advantages Of Industrial Laundering

  • Robust wash formulas to remove heavy soils/hydrocarbons from welding
  • Precise control of wash chemistry, temperatures, drying  
  • Proper handling of FR fabrics to prevent damage
  • Rigorous inspection and repair services
  • Comprehensive record-keeping and documentation

Industrial Wash Process

  • Sorting and inspecting garments 
  • Pre-cleaning spot removal if needed
  • Programmable wash cycles optimized for FR fabrics
  • Wash formulas with pH controllers, anti-deposit agents
  • Proper drying temps and cool-down cycles
  • Inspection, repair of tears/heat damage  
  • Packaging and delivery back to customer

Key considerations

  • Verify industrial laundry is certified for FR processing
  • Look for ISO and industry certifications
  • Ensure appropriate security/custody controls  
  • Inquire about garment tracking and reporting capabilities

Fr Clothing Inspection Criteria And Procedures

Routine inspection of FR clothing is critical for identifying wear and potential safety issues for welders. NFPA standards require documented inspections and procedures.  

What to Inspect

  • Physical damage (rips, tears, fraying, broken seams)
  • Heat damage/burns or material browning from welding 
  • UV damage causing brittleness
  • Soiling or contamination that could impair performance
  • Loss of fit or stretched/distorted garments
  • Fading/discoloration that could indicate degradation

Inspection Procedures

  • Inspect before and after each use/wear cycle
  • Turn garments inside out to inspect for hidden issues
  • Use proper lighting to identify subtle problems  
  • Follow specific brand/manufacturer inspection guidelines
  • Remove from service if defects could affect protection
  • Document all inspections with descriptions/photos

Action Criteria

  • Minor issues – considered repairable if within manufacturer guidelines
  • Major damage/contamination from welding – remove from service, discard
  • Loss of fit/protection – remove and replace garment
  • Routinely replace based on usage cycles or age if no standard

Proper inspections ensure FR clothing still meets safety requirements for welders. Training staff on inspection criteria is essential.

Consumer Education: Understanding Flame Resistant Clothing

When it comes to flame resistant (FR) clothing, there’s a wealth of information available, yet not all of it is accurate. It’s crucial for consumers, whether individual workers or corporate purchasers, to distinguish between the facts and myths surrounding FR clothing. Additionally, understanding the significance of certifications and labels can greatly impact the safety and compliance of these garments. Below, we dive into these topics to provide a clearer picture.

Facts vs. Myths About Flame Resistant Clothing


All FR clothing provides the same level of protection.


The level of protection FR clothing provides varies significantly based on the materials used and the construction of the garment. Different environments and hazards require different levels of protection, categorized by standards such as NFPA 70E for electrical safety and NFPA 2112 for protection against industrial flash fire.


FR clothing is too heavy and uncomfortable for warm climates. 


Advances in material science have led to the development of lightweight, breathable FR fabrics that provide protection while keeping the wearer comfortable, even in hot weather.


You can make regular clothing flame resistant by treating it with certain chemicals.  


While it’s true that some treatments can impart a degree of flame resistance, these homemade solutions are unreliable and can wash out, leaving the wearer dangerously unprotected. Certified FR clothing is rigorously tested to ensure its protective qualities are durable and consistent.


FR clothing is only necessary for those working in direct contact with open flames.


FR clothing is essential for a wide range of industries beyond just those dealing with open flames. Electricians, utility workers, chemical handlers, and many others require FR clothing to protect against the risk of flash fires, electric arcs, and combustible dust explosions.

The Significance of Certifications and Labels

Certifications and labels on FR clothing are not just tags; they’re your assurance that the garment meets specific safety standards and has undergone rigorous testing to verify its protective qualities.


  • NFPA (National Fire Protection Association) Standards: Look for labels indicating compliance with NFPA 70E, NFPA 2112, or NFPA 2113 standards, depending on your specific risk exposure. These standards ensure the clothing has been tested for protection against electrical hazards, flash fires, and other thermal risks.


  • ASTM (American Society for Testing and Materials) Standards: ASTM F1506, for example, specifies the performance requirements for textiles used in clothing exposed to electrical arc hazards.


  • ISO (International Organization for Standardization) and EN (European Norms): For international standards, ISO and EN provide guidelines on the manufacturing and testing of FR clothing, ensuring global compliance and protection.


  • Manufacturer’s Information: Beyond certifications, the manufacturer’s label will often include care instructions, fabric composition, and other crucial information to maintain the garment’s protective properties throughout its lifespan.


Understanding these facts and the importance of certifications and labels empowers consumers to make informed decisions about their FR clothing, ensuring they are adequately protected against the hazards they face in the workplace. Always prioritize safety and compliance by selecting certified FR clothing from reputable manufacturers.

The History of Flame Resistant Clothing

Flame resistant (FR) clothing has a rich history that spans several decades, tracing back to the needs of military personnel and firefighters for protective gear that could withstand extreme conditions. Over time, industries such as welding, oil and gas, and electrical utilities recognized the importance of FR clothing for safeguarding workers against fire hazards. 

Brands like Carhartt, Bulwark, and Tyndale have been at the forefront, developing innovative FR fabrics and garments. Today, you can find FR clothing in stores ranging from specialty safety outlets to major retailers like Walmart and Amazon, ensuring easy access for both individuals and organizational buyers.

The evolution of FR clothing has been significantly influenced by technological advancements, leading to the creation of materials that are not only protective but also comfortable for daily wear. From the military to modern industrial applications, the development and distribution of FR clothing have become a crucial part of workplace safety, supported by rigorous standards such as those established by the National Fire Protection Association (NFPA).

What Industries Benefit the Most from Flame Resistant Clothing?

FR clothing is indispensable in industries where workers are exposed to high heat, flames, or electrical hazards. The oil and gas sector, with its potential for flash fires and explosions, requires workers to wear FR garments as a fundamental safety measure. Similarly, the electrical industry relies on FR clothing to protect against arc flash incidents, with specific garments designed to meet the Hazard Risk Category (HRC) standards.

Welders and individuals in the construction and excavation fields also benefit significantly from wearing FR clothing, as it provides protection against sparks and molten metal splash. Moreover, military personnel and firefighters have specialized FR gear designed for the unique demands of their duties. Brands like Wrangler, Ariat, and Dickies offer a range of FR clothing options catering to these diverse industries, available through various channels, including wholesale, retail, and online platforms like eBay and company websites.

The Difference Between Flame Resistant and Flame Retardant Clothing

While the terms “flame resistant” and “flame retardant” are often used interchangeably, there are subtle differences between them. Flame resistant clothing is made from materials that are inherently resistant to flames and embers. These fabrics don’t easily catch fire, and when they do, they’re designed to self-extinguish once the source of ignition is removed. Brands like Indura and Westex have developed fabrics that provide inherent FR properties, making them a staple in industries that require a high level of fire protection.

On the other hand, flame retardant clothing refers to garments treated with a chemical to impart some level of flame resistance. This treatment can either be applied to the surface of the fabric or incorporated into the fiber during the manufacturing process, enhancing the material’s ability to resist ignition and slow down the spread of flames. However, the effectiveness of the flame retardant treatment can diminish over time, especially with repeated laundering.

Both flame resistant and flame retardant clothing play critical roles in protecting workers from fire-related hazards. It’s essential for consumers and corporate purchasers to understand the distinctions and select the appropriate type of protective clothing based on the specific risks and requirements of their industry.

Can You Recycle Flame Resistant Clothing?

As sustainability becomes a paramount concern across industries, the question of whether flame resistant (FR) clothing can be recycled is increasingly relevant. The ability to recycle FR clothing not only reduces waste but also supports environmental sustainability efforts. However, recycling FR garments presents unique challenges due to the specialized materials and treatments used to provide flame resistance.

The Recycling Challenge

FR clothing is made from various materials, some inherently flame resistant and others treated with flame-retardant chemicals. These materials, such as treated cotton, modacrylics, and aramids like Nomex, have different recycling potentials. Inherently flame-resistant fibers, for example, can sometimes be more readily recycled than treated materials, which may lose their protective properties over time and through the recycling process.


Moreover, the presence of mixed materials in FR clothing, such as blends of synthetic and natural fibers, complicates recycling. The process requires separating these materials, which can be labor-intensive and costly. Additionally, the chemicals used in flame-retardant treatments raise concerns about reintroducing them into the recycling process, necessitating specialized handling to ensure that recycled products are safe for use.

Current Solutions and Innovations

Despite these challenges, efforts are underway to increase the recyclability of FR clothing. Some manufacturers and organizations have initiated take-back programs, where used FR garments are collected and repurposed or recycled into new products. These programs often focus on downcycling, where materials are not necessarily made into new FR clothing but rather into non-apparel products like industrial rags, insulation, or soundproofing materials.

Innovations in recycling technology are also expanding the possibilities for FR garment recycling. Advanced sorting and processing techniques are being developed to more efficiently separate and recycle the diverse materials found in FR clothing. Research into chemical recycling processes, which break down materials at the molecular level, offers potential for reclaiming fibers and treatments for reuse in a way that maintains their protective properties.

The Role of Consumers and Companies

Consumers and companies play a crucial role in the recycling of FR clothing. By participating in take-back programs and advocating for sustainable practices within their industries, they can help drive demand for recycling services and encourage the development of more sustainable FR materials.

Moreover, education about the proper disposal and recycling of FR clothing is essential. Information on how to recycle these garments, provided by manufacturers, retailers, and industry organizations, can guide consumers in making environmentally responsible choices.

Looking Forward

While recycling FR clothing presents specific challenges, the growing emphasis on sustainability in the apparel industry is encouraging innovation and the development of more recyclable materials and processes. As technology advances and awareness increases, the recycling of FR clothing is poised to become a more integral part of the industry’s sustainability efforts, contributing to a reduction in waste and the promotion of environmental stewardship.

What to Know About Flame Resistant Shirts

Flame resistant (FR) shirts are a key component of personal protective equipment (PPE) for individuals working in environments prone to fire hazards. These shirts are designed to protect against burns from flash fires, electric arcs, and other heat-related dangers. When shopping for FR shirts, whether in Houston, Denver, or online platforms like eBay or Amazon, it’s important to consider several factors to ensure maximum protection and comfort.

Material and Construction

 FR shirts are made from materials that resist ignition or self-extinguish once the source of flame is removed. Popular brands like Carhartt, Bulwark, and Tyndale offer shirts made from treated cotton, modacrylic blends, or aramid fibers, providing a range of options for different risk exposures and personal preferences.


Look for shirts that meet industry standards such as NFPA 2112 for flash fire or NFPA 70E for electrical safety. These certifications, often found on labels or product descriptions, are a guarantee of the garment’s protective capabilities.

Fit and Comfort

Comfort is crucial for workwear. FR shirts come in various fits, including tall, slim, and big sizes, to accommodate all body types. Features like breathable fabrics and moisture-wicking properties help keep the wearer comfortable throughout the workday.

Style and Functionality

Modern FR shirts are available in a variety of styles, including button-downs, polos, and T-shirts, allowing workers to maintain a professional appearance without compromising safety. Tactical features like reflective stripes, reinforced pockets, and embroidered company logos offer added functionality and visibility.


Proper care is essential to maintain the protective qualities of FR shirts. Look for garments that can be easily cleaned with regular laundry detergents (without bleach or fabric softeners) and follow the manufacturer’s care instructions to ensure longevity.

What to Know About Flame Resistant Pants

Flame resistant (FR) pants are another critical element of protective workwear, providing leg protection against thermal hazards. As with FR shirts, there are several key points to consider when purchasing FR pants.

Durability and Protection

FR pants should be durable enough to withstand the rigors of the job while offering protection against fire hazards. Brands like Wrangler, Ariat, and Dickies offer FR pants made from heavy-duty materials that resist tears and abrasions, in addition to being flame resistant.


Ensure the pants are certified under relevant safety standards like NFPA 2112 for flash fire protection. This certification confirms that the pants have passed rigorous testing to protect wearers from thermal hazards.

Comfort and Fit

FR pants are available in various styles, including jeans, cargo pants, and coveralls, to suit different preferences and work environments. Look for features such as adjustable waistbands, gusseted crotches, and articulated knees for enhanced comfort and mobility.

Special Features

Many FR pants come with additional features tailored to specific industries. For welders and electricians, pants with no metal parts (to prevent electrical hazards) or with extra-thick material in high-exposure areas can be particularly beneficial. Reflective tape and reinforced pockets are also useful for added safety and functionality.


FR pants are widely available across North America, from local safety gear suppliers in cities like San Antonio and Calgary to national chains like Academy and online retailers. Seasonal sales and clearance events are excellent opportunities to purchase high-quality FR pants at a discount.

When selecting FR shirts and pants, it’s essential to balance protection, comfort, and practicality. By choosing certified FR garments that fit well and meet the specific needs of your industry, you can ensure safety without sacrificing personal style or comfort.

Why Do I Have a Rash from My Flame Resistant Clothing?

Experiencing a rash from wearing flame resistant (FR) clothing can be concerning and uncomfortable. This issue may arise from several factors related to the material composition, laundry detergents used, or the presence of certain chemicals within the fabric. Understanding the potential causes can help in finding a solution and preventing future occurrences.

Material Sensitivity

Some individuals have sensitive skin that may react to the fibers or finishes used in FR clothing. Materials like fiberglass or certain chemical treatments applied to make the clothing flame resistant can irritate the skin. If you’ve recently started wearing a new piece of FR gear and noticed a rash, you might be reacting to a specific material or chemical in that garment.

Laundry Detergents and Fabric Softeners

The type of laundry detergent or fabric softener used can also be a culprit. Some detergents contain harsh chemicals or fragrances that can remain in the fabric after washing and lead to skin irritation. It’s advisable to use mild, hypoallergenic detergents and avoid fabric softeners, as they can leave a residue on the clothing. Furthermore, improper rinsing of the clothes can leave detergent residues, exacerbating skin irritation.

Moisture and Friction

Moisture trapped against the skin, combined with the friction from movement, can cause chafing and rashes, especially in hot and humid environments. FR clothing, depending on its material and weave, might not be as breathable as non-FR fabrics, exacerbating this issue. Opting for FR garments with moisture-wicking properties and ensuring a proper fit to minimize excessive rubbing can help mitigate this problem.

Solutions and Precautions


  • Patch Testing: Before fully committing to a specific brand or type of FR clothing, try wearing a small piece of the fabric against your skin to see if it causes any reaction.


  • Proper Hygiene: Regularly washing your FR clothing according to the manufacturer’s instructions helps remove irritants that could cause skin reactions. Ensure thorough rinsing to eliminate any detergent residue.


  • Skin Barrier Creams: Applying a skin barrier cream before donning FR clothing can provide a protective layer between the fabric and your skin.


  • Consult a Dermatologist: If rashes persist, it may be beneficial to consult with a dermatologist. They can offer insights into whether the rash is indeed caused by the FR clothing or if there’s another underlying skin condition at play.


Experiencing a rash from FR clothing is not only uncomfortable but can also distract you from focusing on your work. By identifying the cause of the irritation and taking appropriate measures, you can ensure your safety and comfort while on the job.

Flame Resistant Clothing Embroidery

Flame resistant (FR) clothing is essential for providing protection in hazardous work environments. Beyond its protective capabilities, there’s a growing demand for personalized FR garments that reflect company branding or individual style. Embroidery on FR clothing, when done correctly, can meet this demand without compromising the garment’s integrity or safety features.

Key Considerations for FR Clothing Embroidery

Material Compatibility

When adding embroidery to FR clothing, it’s crucial to use thread that matches the flame resistant properties of the garment. OEMs and leading brands like Aramark, Bulwark, and Carhartt often recommend or provide FR embroidery services to ensure that all materials used are compliant with industry standards.

Design and Placement

Whether it’s a company logo, a safety slogan, or a personal identifier, the design should be strategically placed to avoid compromising the garment’s protective areas. Embroidery on areas like the chest or upper arm is common, offering visibility without interfering with the garment’s functionality.

Color and Visibility

Choosing the right color for embroidery is not just about aesthetics; it can also enhance visibility. Bright colors like pink, neon green, or reflective silver can be used to improve worker visibility in low-light conditions. Camo patterns or darker colors might be chosen for tactical reasons or personal preference.

Seasonal and Industry-Specific Adaptations

For winter FR garments, embroidery that maintains the integrity of insulated layers is important. Similarly, for construction, oil and gas, and other sectors, the embroidery thread must withstand the same environmental and mechanical stresses as the garment itself, including exposure to rain, dirt, and constant wear.

Quality and Durability

High-quality embroidery is essential to ensure that the added designs or text remain intact and legible throughout the garment’s life. Companies like Sheplers and Wolverine offer customization services that guarantee the embroidery will last as long as the garment does, resisting fading and wear in harsh conditions.

Safety Standards and Certifications 

Embroidery on FR clothing should not compromise the garment’s compliance with safety standards. This means using thread that is flame resistant and ensuring the embroidery process does not alter the fabric’s protective qualities. It’s advisable to consult with the garment manufacturer or a professional embroidery service experienced in FR clothing to ensure that the finished product meets all relevant safety specs.

Making Your Mark with FR Clothing Embroidery

Custom embroidery on flame resistant clothing not only enhances brand recognition and team unity but also allows for individual expression within the bounds of safety requirements. Whether for rental programs, company uniforms, or personal gear, embroidered FR clothing bridges the gap between safety and style. 

By adhering to best practices and partnering with experienced providers, organizations can effectively promote their brand while prioritizing the safety and satisfaction of their team members.

In markets from Las Vegas to Lake Charles, and for every application from construction to electrical work, embroidered FR clothing represents a smart, stylish choice for safety-conscious professionals. With the right approach, you can make a statement that’s both bold and protective, no matter the environment or industry.

Flame Resistant Clothing for Men

Flame resistant (FR) clothing for men is designed to provide protection against a wide range of hazards including flash fires, electric arcs, and thermal exposures. This essential safety gear is a staple in industries such as oil and gas, electrical, welding, and construction, where the risk of exposure to flames and heat is high. Men’s FR clothing ranges from work shirts and pants to coveralls, jackets, and outerwear, each tailored to offer both safety and comfort during long hours of work.

Key Features

  • Durability: Men’s FR clothing is constructed with robust materials that can withstand harsh working conditions without compromising on flame resistance.


  • Comfort: Advances in fabric technology have allowed for FR garments that are not only protective but also breathable, lightweight, and comfortable for all-day wear.


  • Versatility: Available in a variety of styles and fits, including big and tall sizes, to ensure every man can find the right fit for maximum protection and comfort.


  • Compliance: All men’s FR clothing meets industry-specific safety standards, such as NFPA 70E and NFPA 2112, ensuring comprehensive protection against thermal hazards.

Flame Resistant Clothing for Women

The availability and variety of flame resistant (FR) clothing for women have significantly increased, acknowledging the growing presence of women in industries that require protective gear. Women’s FR clothing is designed to fit the female form more accurately, providing not just protection but also comfort and style. This range includes shirts, pants, coveralls, and outerwear specifically tailored for women, ensuring they do not have to compromise on safety or fit.

Key Features

  • Tailored Fit: Women’s FR clothing offers a more contoured fit, addressing the need for comfort and mobility while ensuring the garments provide optimal protection.


  • Style and Function: These garments combine feminine styles with functional design, including adjustable features, stretch fabrics, and practical pocket placements.


  • Safety Compliance: Like men’s FR clothing, women’s options adhere to strict safety standards such as NFPA 70E and NFPA 2112, ensuring they offer proper protection against fire hazards.


  • Variety: The range of women’s FR clothing has expanded to include a wide array of colors, styles, and sizes, catering to a diverse workforce and personal preferences.

Flame Resistant Clothes for Contractors: Stay Safe and Look Sharp on the Job Site

Keeping yourself safe on the job site is paramount, and for contractors, that often means wearing flame-resistant clothing (FRC). FRC is specially treated to resist catching fire or melting, potentially saving you from serious injury in the event of an accident involving flames or sparks.

Choosing the Right Flame-Resistant Clothing

Selecting the right FRC can feel overwhelming with so many options available. Here are some key factors to consider:


  • Protection Level: FR clothing is rated based on its level of protection against flames and heat. Consider the specific hazards you’ll encounter on the job and choose FRC with an appropriate rating.


  • Comfort and Fit: Look for FRC made from breathable fabrics that move freely with your body, allowing for maximum comfort throughout the workday.


  • Durability: Opt for FRC made from high-quality materials that can withstand the wear and tear of demanding construction environments.


  • Brand and Price: Popular FRC brands include Carhartt, Berne, Bulwark, and Riggs. Prices can vary depending on the features, brand, and retailer. Consider exploring outlet stores or promotional codes for more affordable options.

FRC Options for Different Climates

  • Summer: For hot weather conditions, opt for lightweight, breathable FR clothing made from cotton or cotton blends. Look for features like mesh ventilation for added comfort.


  • Cold Weather: During colder months, choose insulated FR coveralls or jackets to stay warm. Consider layering with flame-resistant thermals for added warmth in arctic conditions.

Popular Flame-Resistant Clothing Styles

  • Coveralls: These one-piece garments offer complete protection from head to toe, making them a great choice for various construction tasks.


  • Jeans and Pants: FR jeans and pants provide leg protection and are ideal for tasks involving welding, grinding, or working near open flames.


  • Shirts: Long-sleeved FR shirts are essential for protecting your arms and torso. Choose from button-up or T-shirt styles depending on your preference.

Additional Tips

Maintain your FR clothing by following the manufacturer’s washing and care instructions to ensure your FR clothing retains its flame-resistant properties. Inspect your FR clothing regularly and be sure to look for any signs of wear or damage, and replace your FR clothing if necessary. Invest in a flame-resistant hard hat and boots for complete protection.

By following these tips and choosing the right FRC, you can stay safe and comfortable while working on your next project. Remember, safety should never be compromised, and flame-resistant clothing is an essential investment for any contractor who prioritizes their well-being.


The development of FR clothing for both men and women has come a long way, ensuring that all workers have access to protective gear that fits well, meets safety standards, and is comfortable to wear throughout the workday. As the workforce continues to diversify, the importance of providing suitable protective clothing for everyone cannot be overstated. Whether you’re in the market for men’s rugged work pants or women’s tailored FR shirts, there’s an option out there to meet every need, preference, and safety requirement.


high visibility clothing and halo hat worn by construction workers at night

D.E. Gemmill Inc. is your source online for safety apparel and traffic control products. Our online safety store is here to equip your team for the job.  Since 1986, safety has been our main priority. We understand the need for high-quality equipment that is priced to fit your budget and clothing that’s tough enough for demanding jobs.



Safety Apparel and High-Visibility Clothing

Safety apparel is a broad category of products that includes flame-resistant clothing, protective eyewear, hard hats, protective footwear and more. In a busy work environment where hazards are present, safety apparel is critical to preventing injury. Without it, a minor incident can quickly turn serious and lead to accidents with far-reaching consequences for both workers and employers.

D.E. Gemmill carries:


If you’re unsure what construction safety clothing and gear to buy in our store online, consider:

  • Safety standards. If your jobsite requires specialized apparel because there are moving vehicles or other heavy equipment, safety apparel can help your workers stay aware of one another.
  • Fit. Ensure your workers dress appropriately by supplying them with safety apparel that fits properly.
  • Color requirements. Neon colors help those on and off your jobsite be aware of your workers, whether on the highway or in a construction zone. Bright colors save lives.

If your business needs to order bulk quantities of safety apparel or you need to outfit your workers with more than one piece of clothing, get in touch with us. We can customize and deliver your safety apparel in the sizes and styles you need. And if you’re within 150 miles of our York, PA retail location, we can come to you with our Mobile Safety on Site (S.O.S.) truck.

The Mobile S.O.S. truck makes it possible for your workers to choose their own safety apparel. Talk to us ahead of time, and we can quickly stock the S.O.S. with all of the sizes, styles and colors your workers need to stay safe on the job.


traffic control light wand held in front of a road closed sign









Schedule SOS Truck

Traffic Control Products

Traffic control products for sale at D.E. Gemmill Inc. include light bars, flares, wands, warning lights, temporary traffic control signs, sign stands and more. These and related products help roadwork crews do their jobs safely and efficiently.

Investing in reliable equipment not only helps avoid accidents. It also improves employee morale and productivity while keeping traffic flowing smoothly. Search our online store for products such as:


D.E. Gemmill has experts ready to help you choose the right products. As experienced contractors, we don’t just sell safety equipment — we use it ourselves every day. So, if you’re not sure what to order, just ask! We can review your job requirements and help you choose the traffic gear that’s right for you.

Fall Protection Equipment

fall protection equipment used by a worker in an industrial setting

Ensure your jobsite and workers comply with OSHA regulations and prevent unnecessary injury with our fall systems, designed to keep your workplace as safe as possible. If you work in roofing, construction, utilities or another industry that requires working at heights, it’s in your best interest to use the fall protection gear that will protect you, your workers and your business.

At D.E. Gemmill, we carry:

  • Full-body harnesses
  • Lanyards
  • Carabiners
  • Snap hooks
  • Prevention barriers and other OSHA-compliant fall protection equipment

If you don’t see the work zone traffic control products you need at our online store, stop by our York, PA retail location. We’re conveniently located for customers in Pennsylvania, Maryland, Delaware, New York, New Jersey and Virginia. You or your workers can come in, view our selection and try on the equipment that will make your jobsite safer and OSHA compliant.

Follow the links on the left to browse the main sections of our online catalog. You can also contact our office directly for assistance. Alternately, if you’re in the Central PA area, visit our safety store retail showroom in York for a more hands-on experience.


Shop Fall Protection


There are several considerations that will impact your choice of safety apparel and traffic control products. The first is the condition of your job site. Will workers be exposed to heat, flames or electricity? Will they be working outside or among moving vehicles? Will they be required to go into confined spaces or areas where visibility is poor? What about corrosive liquids and chemical fumes?

Ultimately, you know your business better than anyone and can determine which products are necessary to ensure a safe working environment. At D.E. Gemmill, our safety apparel is rated Class 2 or Class 3, so you can be sure to get the clothing that’s appropriate for your job site’s specific hazards.

When buying traffic control products or safety apparel, you also need to know you’re getting the best value for your money. Choosing a durable product that will deliver on its promises requires doing your research ahead of time and working with an experienced supplier. D.E. Gemmill Inc. carries items by leading brands such as Rasco FR, ML Kishigo, Ariat, GSS, Aervoe and others — manufacturers whose products we know and trust. Get in touch with a representative for help choosing the best items for your needs.


For over 34 years, D.E. Gemmill has built a reputation for providing outstanding products and services to businesses in the construction and paving industry. We’re contractors, too, so we understand the products you need to get your job done safely.

Expert advice is only one part of what sets D.E. Gemmill Inc. apart from other traffic control and safety apparel suppliers. We also offer fast, reliable shipping to customers across the country as well as an exclusive return policy that guarantees your satisfaction. We carefully select all items on our online store to ensure they meet the high demands of our clientele. As a result, it’s easy to shop online with confidence.

If we don’t have what you’re looking for in stock, our team can either recommend an alternative or source it from one of our partners. For years, we have specialized in helping businesses with unique safety requirements find the apparel and other solutions they require.

At D.E. Gemmill, your safety is our business. For more information about our products or to purchase online, contact us today. If you are in the Central PA area you can visit our safety apparel store near you today!

Tim Sullivan
Tim Sullivan
Large selection and staff was amazingly helpful. Highly recommend!!!